Connect your Replit Enterprise Account to Clarion so the exposure agent can find deployments that are reachable from the public internet but were never meant to be.
This guide walks you through connecting a Replit Enterprise Account to Clarion. Once connected, Clarion’s Exposure Agent sweeps the Account daily: it lists your workspaces and deployments, reads each deployment’s privacy setting, checks whether the public ones actually answer on the internet, and opens an issue for anything that looks internal but is reachable by anyone.
Estimated time: 5 minutes. You will need to be an admin of a Replit Enterprise Account, since the Admin API is only available to Account admins on Enterprise Accounts.
Prerequisites
A Replit Enterprise Account, and admin access to it
The ability to create an Admin API key with read scope
A Clarion workspace with the Replit integration page open
One Clarion workspace connects one Replit Account. The key you paste grants read access to everything in the Account that issued it, so create it from the Account whose deployments you want swept.
Step 1 — Create an Admin API key in Replit
Sign in to Replit as an Account admin.
Open your Account settings and find the Admin API section.
Create a new API key with read scope.
Copy the key. It begins with rpl_.
Copy the key immediately and store it securely — Replit may only show it once. Grant read scope only; Clarion never writes to Replit.
Step 2 — Enter the key in Clarion
In Clarion, open Integrations and find Replit under Development & Planning.
Paste your Admin API key.
Click Connect.
Clarion checks the key against Replit before saving it. If the key is wrong or the Account is not entitled to the Admin API, you’ll see a clear error and nothing is stored. To rotate a key later, paste the new one and connect again — it replaces the old one.
What the exposure agent does
The Exposure Agent runs a daily sweep of every provider you have connected. For Replit it:
Step
What happens
Enumerate
Lists the Account’s workspaces and their deployments
Read posture
Records each deployment’s privacy as public, password, or private
Check reachability
Requests the root of public deployments only, and records the response status — never the page content
Classify
Separates deployments that show a login page from those serving open content
File
Opens and escalates an issue for each reachable deployment that looks internal, up to ten per run
Remember
Records each verdict so an intentionally public site stops being re-reported
Deployments set to password or private are recorded as gated and never contacted.
The reachability check is read-only: Clarion requests the deployment’s root address, follows at most two redirects, and keeps only the status code, byte count, and whether the page mentioned signing in. No page content, headers, or cookies are stored, shown, or sent to the agent.
Agent tools
Once connected, agents on this workspace gain access to the /replit action, which exposes these read-only tools:
Tool
What it does
list_workspaces
List every workspace in the connected Account
list_projects
List a workspace’s projects, including who owns each
list_deployments
List a workspace’s deployments with their privacy setting, status, and address
get_deployment
Fetch one deployment’s current privacy setting and status
list_members
List a workspace’s members, used to route a finding to its owner
probe_deployment_root
Check whether one public deployment answers on the internet
All six are read-only and need no approval. None of them can change anything in Replit.
Disconnect
To remove the integration:
In Clarion, open Integrations → Replit.
Click Disconnect.
This deletes the stored key. The exposure agent stops sweeping Replit, and any saved skills that reference the /replit action will surface the integration as missing until you reconnect.
Troubleshooting
”Replit rejected the key”
The key is malformed, unknown, revoked, or expired. Create a fresh Admin API key in your Replit Account settings and connect again. Check that you copied the whole key, including the rpl_ prefix.
”The key needs read scope and Enterprise Admin API entitlement”
Replit authenticated the key but refused the request. Either the key was issued without read scope, or the Account is not an Enterprise Account with Admin API access. Confirm both with your Replit administrator.
A deployment I expected is missing from the sweep summary
If the summary says coverage was incomplete, Replit returned more results than a single sweep walks, and some deployments were not examined. Each run starts from the beginning rather than resuming where the last one stopped, so the same deployments are examined every time and the ones past the limit stay unexamined until the limit is raised. The summary reports this per run, so incomplete coverage is always stated rather than implied. If you see it, let us know how many workspaces and deployments your Account has.
{"docsConfig":{"theme":"mint","$schema":"https://mintlify.com/docs.json","name":"Cantina Documentation","colors":{"primary":"#DB4E11","light":"#F06A32","dark":"#A9380C"},"logo":{"light":"https://mintcdn.com/cantina/tgEekvUexOAC2gco/logo/light.svg?fit=max\u0026auto=format\u0026n=tgEekvUexOAC2gco\u0026q=85\u0026s=501ef0f8eaa0da5329fcd2fcd93143f4","dark":"https://mintcdn.com/cantina/tgEekvUexOAC2gco/logo/dark.svg?fit=max\u0026auto=format\u0026n=tgEekvUexOAC2gco\u0026q=85\u0026s=4b61984ecb438713afdd62d82740395e"},"favicon":"https://mintcdn.com/cantina/FmHlNC94qPGzvjfL/favicon.svg?fit=max\u0026auto=format\u0026n=FmHlNC94qPGzvjfL\u0026q=85\u0026s=a7040063242737a909ec600ee58b971e","background":{"image":{"light":"https://mintcdn.com/cantina/AP2w605nRxe1AmJZ/background-light.svg?fit=max\u0026auto=format\u0026n=AP2w605nRxe1AmJZ\u0026q=85\u0026s=ad8ad733e8e3b4924e61c625aa254cae","dark":"https://mintcdn.com/cantina/AP2w605nRxe1AmJZ/background-dark.svg?fit=max\u0026auto=format\u0026n=AP2w605nRxe1AmJZ\u0026q=85\u0026s=2f37b72a15b9f94b3d12b09eb0c3ec10"},"color":{"light":"#F5EFE4","dark":"#06161E"}},"navbar":{"links":[{"href":"https://www.cantina.security/","label":"Website"},{"href":"mailto:support@cantina.security","label":"Support"}]},"footer":{"socials":{"x":"https://x.com/cantinasecurity","github":"https://github.com/cantina-fyi","linkedin":"https://www.linkedin.com/company/cantinasecurity"}},"contextual":{"options":["copy","view","chatgpt","claude","perplexity","mcp","cursor","vscode"],"display":"header"},"styling":{"latex":true},"navigation":{"pages":[]}},"deployment":{"deploymentMetadataValue":{"subdomain":"cantina","hasAudioNarration":false,"actualSubdomain":"cantina","customDomains":["docs.cantina.security"],"gitSource":{"type":"github","owner":"spearbit","repo":"cantina-docs","deployBranch":"main","contentDirectory":"","isPrivate":true,"mountPath":"","label":""},"entitlements":{"AI_CHAT":{"status":"ENABLED"},"WEB_MCP":{"status":"ENABLED"},"NARRATION":{"status":"ENABLED"}},"buildId":"6af73a4f9b8f20269efb4dde","clientVersion":"0.0.4227","searchFilterCounts":[{"language":"default","tag":"Documentation","count":155},{"language":"default","tag":"Products","count":93},{"language":"default","tag":"Clarion","count":85},{"language":"default","tag":"Integrations","count":69},{"language":"default","tag":"For Security Researchers","count":19},{"language":"default","tag":"For Security Teams","count":19},{"language":"default","tag":"Participation Guides","count":11},{"language":"default","tag":"Learn","count":10},{"language":"default","tag":"Security Solutions","count":10},{"language":"default","tag":"Apex","count":8}]},"assistantConfig":{},"basePath":"","hasChatPermissions":true,"hasWebMcpPermissions":true,"toggles":[{"name":"kill-isr","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"custom-rbac-roles","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-mintlify-slack","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-integrations-settings","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"rbac-expansion","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-pr-grouping","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"custom-prefix","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"analytics-v7","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"user-flows-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"no-publish-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-onboarding","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving-live","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"stripTemperatureMiddleware","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"support-platform-pylon-zendesk","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"instant-rollback","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications-server","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-fable","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fixed-ai-action-pricing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automation-resolve-merge-conflict","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"scoped-publishing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"mintql","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"page-level-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-version-history-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"billing-page-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"full-page-search","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workspace-projects","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"assistant-v5","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fork-pr-previews","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"revalidation-jwt","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-sso-scim","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"hobby-abuse-scan","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"dashboard-inbox","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-signup","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-dual-write","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-enabled","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"approve-review-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-metadata","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"sso-setup-deadline-banner","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-serve","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"live-agents","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"starter-pricing","enabled":true,"variant":{"name":"control","enabled":true,"payload":{"type":"string","value":"control"},"feature_enabled":true},"impressionData":false},{"name":"llms-txt-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"wildcard-email-auth","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false}],"googleFontsInlined":false},"customCss":[{"filePath":"style.css","content":"#background-color{z-index:-10!important;pointer-events:none!important}span.fixed.inset-0.pointer-events-none{background-size:cover!important;background-position:top right!important;background-repeat:no-repeat!important;background-attachment:fixed!important}#navbar,#sidebar,#sidebar-content,#table-of-contents,#table-of-contents-content{background-color:rgb(var(--background-light) / 0.97)}:is(.dark) #navbar,:is(.dark) #table-of-contents,:is(.dark) #table-of-contents-content,.dark #navbar,.dark #table-of-contents,.dark #table-of-contents-content{background-color:rgb(var(--background-dark) / 0.55)}:is(.dark) #sidebar,.dark #sidebar{background-color:transparent!important;background-image:linear-gradient(\n to bottom,\n rgb(var(--background-dark) / 0.28) 0%,\n rgb(var(--background-dark) / 0.5) 28%,\n rgb(var(--background-dark) / 0.68) 55%,\n rgb(var(--background-dark) / 0.72) 100%\n )!important;-webkit-mask-image:linear-gradient(\n to right,\n #000 0%,\n #000 calc(100% - 22px),\n transparent 100%\n );mask-image:linear-gradient(\n to right,\n #000 0%,\n #000 calc(100% - 22px),\n transparent 100%\n )}:is(.dark) #sidebar-content,.dark #sidebar-content{background-color:transparent!important}:is(.dark) #navbar-transition,.dark #navbar-transition{border-bottom-color:transparent!important;border-color:transparent!important}:is(.dark) #navbar,:is(.dark) #sidebar,:is(.dark) #sidebar-content,:is(.dark) #table-of-contents,:is(.dark) #table-of-contents-content,:is(.dark) #content-area,.dark #navbar,.dark #sidebar,.dark #sidebar-content,.dark #table-of-contents,.dark #table-of-contents-content,.dark #content-area{border-color:transparent!important;box-shadow:none!important}:is(.dark) #sidebar button,:is(.dark) #sidebar .nav-dropdown-item-icon,:is(.dark) #navbar button,.dark #sidebar button,.dark #sidebar .nav-dropdown-item-icon,.dark #navbar button{border-color:transparent!important;box-shadow:none!important}"}]}
{"page":{"pagePath":"clarion/integrations/replit","slug":"/clarion/integrations/replit","pageMetadata":{"title":"Replit","description":"Connect your Replit Enterprise Account to Clarion so the exposure agent can find deployments that are reachable from the public internet but were never meant to be.","href":"/clarion/integrations/replit"},"description":{"compiledSource":"\"use strict\";\nconst {jsx: _jsx} = arguments[0];\nconst {useMDXComponents: _provideComponents} = arguments[0];\nfunction _createMdxContent(props) {\n const _components = {\n p: \"p\",\n ..._provideComponents(),\n ...props.components\n };\n return _jsx(_components.p, {\n children: \"Connect your Replit Enterprise Account to Clarion so the exposure agent can find deployments that are reachable from the public internet but were never meant to be.\"\n });\n}\nfunction MDXContent(props = {}) {\n const {wrapper: MDXLayout} = {\n ..._provideComponents(),\n ...props.components\n };\n return MDXLayout ? _jsx(MDXLayout, {\n ...props,\n children: _jsx(_createMdxContent, {\n ...props\n })\n }) : _createMdxContent(props);\n}\nreturn {\n default: MDXContent\n};\n","frontmatter":{},"scope":{}},"pageType":"default","mdx":{"mdxSource":{"compiledSource":"\"use strict\";const{Fragment:_Fragment,jsx:_jsx,jsxs:_jsxs}=arguments[0];const{useMDXComponents:_provideComponents}=arguments[0];function _createMdxContent(props){const _components={code:`code`,hr:`hr`,li:`li`,ol:`ol`,p:`p`,strong:`strong`,tbody:`tbody`,td:`td`,th:`th`,thead:`thead`,tr:`tr`,ul:`ul`,..._provideComponents(),...props.components},{Heading,Note,Table,Warning}=_components;if(!Heading)_missingMdxReference(`Heading`,true);if(!Note)_missingMdxReference(`Note`,true);if(!Table)_missingMdxReference(`Table`,true);if(!Warning)_missingMdxReference(`Warning`,true);return _jsxs(_Fragment,{children:[_jsx(_components.p,{children:`This guide walks you through connecting a Replit Enterprise Account to Clarion. Once connected, Clarion’s Exposure Agent sweeps the Account daily: it lists your workspaces and deployments, reads each deployment’s privacy setting, checks whether the public ones actually answer on the internet, and opens an issue for anything that looks internal but is reachable by anyone.`}),`\n`,_jsx(Note,{children:_jsxs(_components.p,{children:[_jsx(_components.strong,{children:`Estimated time:`}),` 5 minutes. You will need to be an `,_jsx(_components.strong,{children:`admin of a Replit Enterprise Account`}),`, since the Admin API is only available to Account admins on Enterprise Accounts.`]})}),`\n`,_jsx(Heading,{level:`2`,id:`prerequisites`,children:`Prerequisites`}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`A `,_jsx(_components.strong,{children:`Replit Enterprise Account`}),`, and `,_jsx(_components.strong,{children:`admin`}),` access to it`]}),`\n`,_jsxs(_components.li,{children:[`The ability to create an `,_jsx(_components.strong,{children:`Admin API key`}),` with read scope`]}),`\n`,_jsxs(_components.li,{children:[`A `,_jsx(_components.strong,{children:`Clarion workspace`}),` with the Replit integration page open`]}),`\n`]}),`\n`,_jsx(Warning,{children:_jsx(_components.p,{children:`One Clarion workspace connects one Replit Account. The key you paste grants read access to everything in the Account that issued it, so create it from the Account whose deployments you want swept.`})}),`\n`,_jsx(_components.hr,{}),`\n`,_jsx(Heading,{level:`2`,id:`step-1-—-create-an-admin-api-key-in-replit`,children:`Step 1 — Create an Admin API key in Replit`}),`\n`,_jsxs(_components.ol,{children:[`\n`,_jsx(_components.li,{children:`Sign in to Replit as an Account admin.`}),`\n`,_jsxs(_components.li,{children:[`Open your `,_jsx(_components.strong,{children:`Account`}),` settings and find the `,_jsx(_components.strong,{children:`Admin API`}),` section.`]}),`\n`,_jsxs(_components.li,{children:[`Create a new API key with `,_jsx(_components.strong,{children:`read`}),` scope.`]}),`\n`,_jsxs(_components.li,{children:[`Copy the key. It begins with `,_jsx(_components.code,{children:`rpl_`}),`.`]}),`\n`]}),`\n`,_jsx(Warning,{children:_jsx(_components.p,{children:`Copy the key immediately and store it securely — Replit may only show it once. Grant read scope only; Clarion never writes to Replit.`})}),`\n`,_jsx(_components.hr,{}),`\n`,_jsx(Heading,{level:`2`,id:`step-2-—-enter-the-key-in-clarion`,children:`Step 2 — Enter the key in Clarion`}),`\n`,_jsxs(_components.ol,{children:[`\n`,_jsxs(_components.li,{children:[`In Clarion, open `,_jsx(_components.strong,{children:`Integrations`}),` and find `,_jsx(_components.strong,{children:`Replit`}),` under Development \u0026 Planning.`]}),`\n`,_jsxs(_components.li,{children:[`Paste your `,_jsx(_components.strong,{children:`Admin API key`}),`.`]}),`\n`,_jsxs(_components.li,{children:[`Click `,_jsx(_components.strong,{children:`Connect`}),`.`]}),`\n`]}),`\n`,_jsx(_components.p,{children:`Clarion checks the key against Replit before saving it. If the key is wrong or the Account is not entitled to the Admin API, you’ll see a clear error and nothing is stored. To rotate a key later, paste the new one and connect again — it replaces the old one.`}),`\n`,_jsx(_components.hr,{}),`\n`,_jsx(Heading,{level:`2`,id:`what-the-exposure-agent-does`,children:`What the exposure agent does`}),`\n`,_jsx(_components.p,{children:`The Exposure Agent runs a daily sweep of every provider you have connected. For Replit it:`}),`\n`,_jsxs(Table,{children:[_jsx(_components.thead,{children:_jsxs(_components.tr,{children:[_jsx(_components.th,{children:`Step`}),_jsx(_components.th,{children:`What happens`})]})}),_jsxs(_components.tbody,{children:[_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`Enumerate`}),_jsx(_components.td,{children:`Lists the Account’s workspaces and their deployments`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`Read posture`}),_jsxs(_components.td,{children:[`Records each deployment’s privacy as `,_jsx(_components.code,{children:`public`}),`, `,_jsx(_components.code,{children:`password`}),`, or `,_jsx(_components.code,{children:`private`})]})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`Check reachability`}),_jsx(_components.td,{children:`Requests the root of public deployments only, and records the response status — never the page content`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`Classify`}),_jsx(_components.td,{children:`Separates deployments that show a login page from those serving open content`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`File`}),_jsx(_components.td,{children:`Opens and escalates an issue for each reachable deployment that looks internal, up to ten per run`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`Remember`}),_jsx(_components.td,{children:`Records each verdict so an intentionally public site stops being re-reported`})]})]})]}),`\n`,_jsxs(_components.p,{children:[`Deployments set to `,_jsx(_components.code,{children:`password`}),` or `,_jsx(_components.code,{children:`private`}),` are recorded as gated and never contacted.`]}),`\n`,_jsx(Note,{children:_jsx(_components.p,{children:`The reachability check is read-only: Clarion requests the deployment’s root address, follows at most two redirects, and keeps only the status code, byte count, and whether the page mentioned signing in. No page content, headers, or cookies are stored, shown, or sent to the agent.`})}),`\n`,_jsx(Heading,{level:`3`,id:`agent-tools`,children:`Agent tools`}),`\n`,_jsxs(_components.p,{children:[`Once connected, agents on this workspace gain access to the `,_jsx(_components.code,{children:`/replit`}),` action, which exposes these read-only tools:`]}),`\n`,_jsxs(Table,{children:[_jsx(_components.thead,{children:_jsxs(_components.tr,{children:[_jsx(_components.th,{children:`Tool`}),_jsx(_components.th,{children:`What it does`})]})}),_jsxs(_components.tbody,{children:[_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.code,{children:`list_workspaces`})}),_jsx(_components.td,{children:`List every workspace in the connected Account`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.code,{children:`list_projects`})}),_jsx(_components.td,{children:`List a workspace’s projects, including who owns each`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.code,{children:`list_deployments`})}),_jsx(_components.td,{children:`List a workspace’s deployments with their privacy setting, status, and address`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.code,{children:`get_deployment`})}),_jsx(_components.td,{children:`Fetch one deployment’s current privacy setting and status`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.code,{children:`list_members`})}),_jsx(_components.td,{children:`List a workspace’s members, used to route a finding to its owner`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.code,{children:`probe_deployment_root`})}),_jsx(_components.td,{children:`Check whether one public deployment answers on the internet`})]})]})]}),`\n`,_jsx(_components.p,{children:`All six are read-only and need no approval. None of them can change anything in Replit.`}),`\n`,_jsx(_components.hr,{}),`\n`,_jsx(Heading,{level:`2`,id:`disconnect`,children:`Disconnect`}),`\n`,_jsx(_components.p,{children:`To remove the integration:`}),`\n`,_jsxs(_components.ol,{children:[`\n`,_jsxs(_components.li,{children:[`In Clarion, open `,_jsx(_components.strong,{children:`Integrations → Replit`}),`.`]}),`\n`,_jsxs(_components.li,{children:[`Click `,_jsx(_components.strong,{children:`Disconnect`}),`.`]}),`\n`]}),`\n`,_jsxs(_components.p,{children:[`This deletes the stored key. The exposure agent stops sweeping Replit, and any saved skills that reference the `,_jsx(_components.code,{children:`/replit`}),` action will surface the integration as missing until you reconnect.`]}),`\n`,_jsx(_components.hr,{}),`\n`,_jsx(Heading,{level:`2`,id:`troubleshooting`,children:`Troubleshooting`}),`\n`,_jsx(Heading,{level:`3`,id:`”replit-rejected-the-key”`,children:`”Replit rejected the key”`}),`\n`,_jsxs(_components.p,{children:[`The key is malformed, unknown, revoked, or expired. Create a fresh Admin API key in your Replit Account settings and connect again. Check that you copied the whole key, including the `,_jsx(_components.code,{children:`rpl_`}),` prefix.`]}),`\n`,_jsx(Heading,{level:`3`,id:`”the-key-needs-read-scope-and-enterprise-admin-api-entitlement”`,children:`”The key needs read scope and Enterprise Admin API entitlement”`}),`\n`,_jsx(_components.p,{children:`Replit authenticated the key but refused the request. Either the key was issued without read scope, or the Account is not an Enterprise Account with Admin API access. Confirm both with your Replit administrator.`}),`\n`,_jsx(Heading,{level:`3`,id:`a-deployment-i-expected-is-missing-from-the-sweep-summary`,children:`A deployment I expected is missing from the sweep summary`}),`\n`,_jsxs(_components.p,{children:[`If the summary says coverage was `,_jsx(_components.strong,{children:`incomplete`}),`, Replit returned more results than a single sweep walks, and some deployments were not examined. Each run starts from the beginning rather than resuming where the last one stopped, so the same deployments are examined every time and the ones past the limit stay unexamined until the limit is raised. The summary reports this per run, so incomplete coverage is always stated rather than implied. If you see it, let us know how many workspaces and deployments your Account has.`]})]})}function MDXContent(props={}){const{wrapper:MDXLayout}={..._provideComponents(),...props.components};return MDXLayout?_jsx(MDXLayout,{...props,children:_jsx(_createMdxContent,{...props})}):_createMdxContent(props)}return{default:MDXContent};function _missingMdxReference(id,component){throw new Error(`Expected `+(component?`component`:`object`)+\" `\"+id+\"` to be defined: you likely forgot to import, pass, or provide it.\")}","frontmatter":{},"scope":{"config":{},"pageMetadata":{"title":"Replit","description":"Connect your Replit Enterprise Account to Clarion so the exposure agent can find deployments that are reachable from the public internet but were never meant to be.","href":"/clarion/integrations/replit"}}},"mdxSourceWithNoJs":null},"mdxExtracts":{"tableOfContents":[{"title":"Prerequisites","slug":"prerequisites","depth":2,"children":[]},{"title":"Step 1 — Create an Admin API key in Replit","slug":"step-1-—-create-an-admin-api-key-in-replit","depth":2,"children":[]},{"title":"Step 2 — Enter the key in Clarion","slug":"step-2-—-enter-the-key-in-clarion","depth":2,"children":[]},{"title":"What the exposure agent does","slug":"what-the-exposure-agent-does","depth":2,"children":[{"title":"Agent tools","slug":"agent-tools","depth":3,"children":[]}]},{"title":"Disconnect","slug":"disconnect","depth":2,"children":[]},{"title":"Troubleshooting","slug":"troubleshooting","depth":2,"children":[{"title":"”Replit rejected the key”","slug":"”replit-rejected-the-key”","depth":3,"children":[]},{"title":"”The key needs read scope and Enterprise Admin API entitlement”","slug":"”the-key-needs-read-scope-and-enterprise-admin-api-entitlement”","depth":3,"children":[]},{"title":"A deployment I expected is missing from the sweep summary","slug":"a-deployment-i-expected-is-missing-from-the-sweep-summary","depth":3,"children":[]}]}],"codeExamples":{}},"jsLinks":[],"subdomain":"cantina","siteName":"Cantina Documentation","title":"Replit - Cantina Documentation","navMaps":{"firstHrefInVersion":{},"firstHrefInLanguage":{}},"lastModified":"2026-11-13T15:11:35.069Z","originalFileLocation":"clarion/integrations/replit.mdx"},"headHtml":"\u003cscript data-mint-head>(function(){var d=document.documentElement,p=null;if(!p){try{p=localStorage.getItem(\"isDarkMode\")}catch(e){}if(p==='true')p='dark';else if(p==='false')p='light';if(p!=='light'\u0026\u0026p!=='dark'\u0026\u0026p!=='system')p=\"system\"}var r=p==='system'?(matchMedia(\"(prefers-color-scheme: dark)\").matches?'dark':'light'):p;d.classList.remove(r==='dark'?'light':'dark');d.classList.add(r);d.setAttribute(\"data-theme-preference\",p)})();\u003c/script>\u003cmeta data-mint-head name=\"description\" content=\"Connect your Replit Enterprise Account to Clarion so the exposure agent can find deployments that are reachable from the public internet but were never meant to be.\">\u003cmeta data-mint-head name=\"application-name\" content=\"Cantina Documentation\">\u003cmeta data-mint-head name=\"generator\" content=\"Mintlify\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/cantina/e46l_1vpQTNpB2S9/_generated/favicon/android-chrome-192x192.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"apple-touch-icon\" type=\"image/png\" sizes=\"180x180\" href=\"/mintlify-assets/_mintlify/favicons/cantina/e46l_1vpQTNpB2S9/_generated/favicon/apple-touch-icon.png\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/cantina/e46l_1vpQTNpB2S9/_generated/favicon/favicon-16x16.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/cantina/e46l_1vpQTNpB2S9/_generated/favicon/favicon-32x32.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/cantina/e46l_1vpQTNpB2S9/_generated/favicon/favicon.ico\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/cantina/e46l_1vpQTNpB2S9/_generated/favicon-dark/android-chrome-192x192.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/cantina/e46l_1vpQTNpB2S9/_generated/favicon-dark/favicon-16x16.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/cantina/e46l_1vpQTNpB2S9/_generated/favicon-dark/favicon-32x32.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/cantina/e46l_1vpQTNpB2S9/_generated/favicon-dark/favicon.ico\" media=\"(prefers-color-scheme: dark)\">\u003cmeta data-mint-head property=\"og:title\" content=\"Replit - Cantina Documentation\">\u003cmeta data-mint-head property=\"og:description\" content=\"Connect your Replit Enterprise Account to Clarion so the exposure agent can find deployments that are reachable from the public internet but were never meant to be.\">\u003cmeta data-mint-head property=\"og:site_name\" content=\"Cantina Documentation\">\u003cmeta data-mint-head property=\"og:url\" content=\"https://docs.cantina.security/clarion/integrations/replit\">\u003cmeta data-mint-head property=\"og:type\" content=\"website\">\u003cmeta data-mint-head property=\"og:image\" content=\"https://cantina.mintlify.site/_mintlify/api/og/v2?division=Integrations\u0026amp;title=Replit\u0026amp;description=Connect+your+Replit+Enterprise+Account+to+Clarion+so+the+exposure+agent+can+find+deployments+that+are+reachable+from+the+public+internet+but+were+never+meant+to\u0026amp;theme=90d6f2cacec23e54ce113d35\u0026amp;signature=03e06d0e3f961e6e2d0dd12c4e3d76ed786fa4c5900a378168bfcd37cd04d7d2\">\u003cmeta data-mint-head property=\"og:image:width\" content=\"1200\">\u003cmeta data-mint-head property=\"og:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"twitter:card\" content=\"summary_large_image\">\u003cmeta data-mint-head name=\"twitter:title\" content=\"Replit - Cantina Documentation\">\u003cmeta data-mint-head name=\"twitter:description\" content=\"Connect your Replit Enterprise Account to Clarion so the exposure agent can find deployments that are reachable from the public internet but were never meant to be.\">\u003cmeta data-mint-head name=\"twitter:image\" content=\"https://cantina.mintlify.site/_mintlify/api/og/v2?division=Integrations\u0026amp;title=Replit\u0026amp;description=Connect+your+Replit+Enterprise+Account+to+Clarion+so+the+exposure+agent+can+find+deployments+that+are+reachable+from+the+public+internet+but+were+never+meant+to\u0026amp;theme=90d6f2cacec23e54ce113d35\u0026amp;signature=03e06d0e3f961e6e2d0dd12c4e3d76ed786fa4c5900a378168bfcd37cd04d7d2\">\u003cmeta data-mint-head name=\"twitter:image:width\" content=\"1200\">\u003cmeta data-mint-head name=\"twitter:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"msapplication-config\" content=\"/mintlify-assets/_mintlify/favicons/cantina/e46l_1vpQTNpB2S9/_generated/favicon/browserconfig.xml\">\u003cmeta data-mint-head name=\"apple-mobile-web-app-title\" content=\"Cantina Documentation\">\u003cmeta data-mint-head name=\"msapplication-TileColor\" content=\"#DB4E11\">\u003clink data-mint-head rel=\"canonical\" href=\"https://docs.cantina.security/clarion/integrations/replit\">\u003clink data-mint-head rel=\"alternate\" type=\"application/xml\" href=\"/sitemap.xml\">\u003clink data-mint-head rel=\"alternate\" type=\"text/markdown\" href=\"/clarion/integrations/replit.md\">\u003cscript data-mint-head type=\"application/ld+json\">{\"@context\":\"https://schema.org\",\"@graph\":[{\"@type\":\"Organization\",\"@id\":\"https://docs.cantina.security/#organization\",\"name\":\"Cantina Documentation\",\"url\":\"https://docs.cantina.security\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https://mintcdn.com/cantina/tgEekvUexOAC2gco/logo/light.svg?fit=max\u0026auto=format\u0026n=tgEekvUexOAC2gco\u0026q=85\u0026s=501ef0f8eaa0da5329fcd2fcd93143f4\"}},{\"@type\":\"WebSite\",\"@id\":\"https://docs.cantina.security#website\",\"name\":\"Cantina Documentation\",\"url\":\"https://docs.cantina.security\",\"publisher\":{\"@id\":\"https://docs.cantina.security/#organization\"}},{\"@type\":\"WebPage\",\"@id\":\"https://docs.cantina.security/clarion/integrations/replit#webpage\",\"url\":\"https://docs.cantina.security/clarion/integrations/replit\",\"name\":\"Replit\",\"description\":\"Connect your Replit Enterprise Account to Clarion so the exposure agent can find deployments that are reachable from the public internet but were never meant to be.\",\"dateModified\":\"2026-11-13T15:11:35.069Z\",\"isPartOf\":{\"@id\":\"https://docs.cantina.security#website\"},\"breadcrumb\":{\"@id\":\"https://docs.cantina.security/clarion/integrations/replit#breadcrumb\"}},{\"@type\":\"BreadcrumbList\",\"@id\":\"https://docs.cantina.security/clarion/integrations/replit#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Products\",\"item\":\"https://docs.cantina.security/apex\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Clarion\",\"item\":\"https://docs.cantina.security/clarion\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Integrations\",\"item\":\"https://docs.cantina.security/clarion/integrations/aws\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"Replit\",\"item\":\"https://docs.cantina.security/clarion/integrations/replit\"}]},{\"@type\":[\"Article\",\"TechArticle\"],\"@id\":\"https://docs.cantina.security/clarion/integrations/replit#article\",\"headline\":\"Replit\",\"name\":\"Replit\",\"description\":\"Connect your Replit Enterprise Account to Clarion so the exposure agent can find deployments that are reachable from the public internet but were never meant to be.\",\"url\":\"https://docs.cantina.security/clarion/integrations/replit\",\"mainEntityOfPage\":{\"@id\":\"https://docs.cantina.security/clarion/integrations/replit#webpage\"},\"dateModified\":\"2026-11-13T15:11:35.069Z\",\"publisher\":{\"@id\":\"https://docs.cantina.security/#organization\"},\"isPartOf\":{\"@id\":\"https://docs.cantina.security#website\"}}]}\u003c/script>\u003cscript data-mint-head type=\"application/ld+json\">{\"@context\":\"https://schema.org\",\"@type\":\"WebSite\",\"name\":\"Cantina Documentation\",\"publisher\":{\"@type\":\"Organization\",\"name\":\"Cantina Documentation\"},\"provider\":{\"@type\":\"Organization\",\"name\":\"Mintlify\",\"url\":\"https://mintlify.com\"}}\u003c/script>","agentPointerHref":"/clarion/integrations/replit.md","siteName":"Cantina Documentation","nav":{"global":null,"dropdowns":[{"dropdown":"Documentation","icon":"book","description":"Cantina Documentation","groups":[{"group":"Introduction","pages":[{"title":"Welcome to Cantina","href":"/introduction"},{"title":"How Cantina works: the loop","href":"/how-it-works"},{"title":"Vision and approach","href":"/vision-and-approach"},{"title":"Use Cantina with AI agents","href":"/agent-resources"}]},{"group":"Platform Overview","pages":[{"title":"Platform overview","href":"/platform/overview"},{"title":"The security loop","href":"/platform/the-loop"},{"title":"Products at a glance","href":"/platform/products"},{"title":"Trust, auditability, and human control","href":"/platform/trust"}]},{"group":"Products","pages":[{"group":"Apex","pages":[{"title":"Apex AI penetration testing and code security","href":"/apex"},{"title":"AI penetration testing and code security","href":"/apex/penetration-testing"},{"title":"Client onboarding guide","href":"/apex/onboarding"},{"title":"Apex scan manual","href":"/apex/scan-manual"},{"title":"Scheduled scans","href":"/apex/scheduled-scans"},{"title":"Apex CLI guide","href":"/apex/cli"},{"title":"Apex service API","href":"/apex/api"},{"title":"Apex API agent environment","href":"/apex/api-agent-environment"}]},{"group":"Clarion","pages":[{"group":"Getting Started","pages":[{"title":"Clarion security operations documentation","href":"/clarion"},{"title":"Getting started","href":"/clarion/getting-started"}]},{"group":"Easy ROI","pages":[{"title":"Measuring your ROI","href":"/clarion/roi/measuring-roi"},{"title":"Getting the most value","href":"/clarion/roi/getting-the-most-value"}]},{"group":"Knowledge Base","pages":[{"title":"Knowledge base","href":"/clarion/knowledge-base"}]},{"group":"Learn","pages":[{"title":"Introduction","href":"/clarion/learn"},{"title":"Issues","href":"/clarion/learn/issues"},{"title":"Signals","href":"/clarion/learn/signals"},{"title":"Tasks","href":"/clarion/learn/tasks"},{"title":"Agents","href":"/clarion/learn/agents"},{"title":"Skills","href":"/clarion/learn/skills"},{"title":"Tools","href":"/clarion/learn/tools"},{"title":"AI chat","href":"/clarion/learn/chat"},{"title":"Notifications","href":"/clarion/learn/notifications"},{"title":"Settings","href":"/clarion/learn/settings"}]},{"group":"Integrations","pages":[{"group":"AWS","pages":[{"title":"AWS","href":"/clarion/integrations/aws"},{"title":"EventBridge and SNS","href":"/clarion/integrations/aws/eventbridge"},{"title":"CloudTrail via existing S3 bucket","href":"/clarion/integrations/aws/cloudtrail-s3"}]},{"group":"Google Cloud","pages":[{"title":"Google Cloud","href":"/clarion/integrations/google-cloud"},{"title":"Cloud Logging","href":"/clarion/integrations/google-cloud/cloud-logging"},{"title":"Cloud Monitoring","href":"/clarion/integrations/google-cloud/cloud-monitoring"},{"title":"Security Command Center","href":"/clarion/integrations/google-cloud/security-command-center"}]},{"group":"Cloudflare","pages":[{"title":"Cloudflare","href":"/clarion/integrations/cloudflare"},{"title":"Logpush","href":"/clarion/integrations/cloudflare/logpush"}]},{"group":"Threat Intel","pages":[{"title":"Threat Intel","href":"/clarion/integrations/threat-intel"},{"title":"Webhook","href":"/clarion/integrations/threat-intel/webhook"},{"title":"RSS Feed","href":"/clarion/integrations/threat-intel/rss-feed"}]},{"title":"Okta","href":"/clarion/integrations/okta"},{"title":"Microsoft Entra ID","href":"/clarion/integrations/microsoft-entra-id"},{"title":"Microsoft Sentinel","href":"/clarion/integrations/microsoft-sentinel"},{"title":"Microsoft SharePoint","href":"/clarion/integrations/microsoft-sharepoint"},{"title":"Microsoft Teams","href":"/clarion/integrations/microsoft-teams"},{"title":"Google Workspace","href":"/clarion/integrations/google-workspace"},{"title":"Google Calendar","href":"/clarion/integrations/google-calendar"},{"title":"JumpCloud","href":"/clarion/integrations/jumpcloud"},{"title":"1Password","href":"/clarion/integrations/1password"},{"title":"NinjaOne","href":"/clarion/integrations/ninjaone"},{"title":"Swif","href":"/clarion/integrations/swif"},{"title":"Vanta","href":"/clarion/integrations/vanta"},{"title":"CrowdStrike Falcon","href":"/clarion/integrations/crowdstrike"},{"title":"SentinelOne","href":"/clarion/integrations/sentinelone"},{"title":"Huntress","href":"/clarion/integrations/huntress"},{"title":"Microsoft Defender XDR","href":"/clarion/integrations/microsoft-defender-xdr"},{"title":"Wiz","href":"/clarion/integrations/wiz"},{"title":"Falco","href":"/clarion/integrations/falco"},{"title":"Splunk","href":"/clarion/integrations/splunk"},{"title":"Datadog","href":"/clarion/integrations/datadog"},{"title":"Grafana","href":"/clarion/integrations/grafana"},{"title":"Better Stack","href":"/clarion/integrations/betterstack"},{"title":"Status Page","href":"/clarion/integrations/status-page"},{"title":"DNS Monitor","href":"/clarion/integrations/dns"},{"title":"Envoy","href":"/clarion/integrations/envoy"},{"title":"Hypernative","href":"/clarion/integrations/hypernative"},{"title":"Hexagate","href":"/clarion/integrations/hexagate"},{"title":"Tenderly","href":"/clarion/integrations/tenderly"},{"title":"Guardrail","href":"/clarion/integrations/guardrail"},{"title":"Cantina Bug Bounty","href":"/clarion/integrations/cantina-bbp"},{"title":"Iru","href":"/clarion/integrations/iru"},{"title":"Apex","href":"/clarion/integrations/apex"},{"title":"NightVision","href":"/clarion/integrations/nightvision"},{"title":"GitHub","href":"/clarion/integrations/github"},{"title":"Vercel","href":"/clarion/integrations/vercel"},{"title":"Supabase","description":"Give agents read-only access to a Supabase project — security advisors, auth and Postgres logs, schema, and SQL — during an investigation.","href":"/clarion/integrations/supabase"},{"title":"Replit","href":"/clarion/integrations/replit"},{"title":"Jira","description":"Connect Jira Cloud to Clarion with an Atlassian service account so agents can create, look up, and search issues during triage.","href":"/clarion/integrations/jira"},{"title":"Linear","href":"/clarion/integrations/linear"},{"title":"Pylon","href":"/clarion/integrations/pylon"},{"title":"Notion","href":"/clarion/integrations/notion"},{"title":"Confluence","href":"/clarion/integrations/confluence"},{"title":"Slack","href":"/clarion/integrations/slack"},{"title":"Telegram Notifications","href":"/clarion/integrations/telegram"},{"title":"Telegram Chats","href":"/clarion/integrations/telegram-chats"},{"title":"Twilio (SMS \u0026 phone)","href":"/clarion/integrations/twilio"},{"title":"PagerDuty","href":"/clarion/integrations/pagerduty"},{"title":"incident.io","href":"/clarion/integrations/incident-io"},{"title":"Halo","href":"/clarion/integrations/halo"},{"title":"Tailscale","href":"/clarion/integrations/tailscale"},{"title":"Zscaler","href":"/clarion/integrations/zscaler"},{"title":"Generic Webhook","href":"/clarion/integrations/generic-webhook"},{"title":"Custom MCP","href":"/clarion/integrations/custom-mcp"},{"title":"Custom toolset (API)","href":"/clarion/integrations/custom-toolset"},{"title":"Claude Code","href":"/clarion/integrations/claude-code"},{"title":"Devin","href":"/clarion/integrations/devin"},{"title":"OpenClaw","href":"/clarion/integrations/openclaw"}]},{"group":"Terms","pages":[{"title":"Clarion Terms of Service","href":"/resources/clarion-terms"}]}]}]},{"group":"For Security Teams","pages":[{"group":"Getting Started","pages":[{"title":"Getting Started with Cantina","href":"/security-teams/getting-started"},{"title":"API Access","href":"/security-teams/getting-started/api-access"},{"title":"SSO Configuration","href":"/security-teams/getting-started/sso"}]},{"group":"Security Solutions","pages":[{"title":"Security solutions","href":"/security-teams/services"},{"title":"Smart Contract Security Audits","href":"/security-teams/services/smart-contract-audits"},{"title":"Application Security Audits","href":"/security-teams/services/application-security-audits"},{"title":"Competitions","href":"/security-teams/services/competitions"},{"title":"Bug Bounty","href":"/security-teams/services/bug-bounty"},{"title":"Penetration Testing","href":"/security-teams/services/penetration-testing"},{"title":"Managed Detection and Response","href":"/security-teams/services/managed-detection-and-response"},{"title":"Advisory","href":"/security-teams/services/advisory"},{"title":"Multisig Security","href":"/security-teams/services/multisig-security"},{"title":"How Cantina Audits Work","href":"/security-teams/services/how-audits-work"}]},{"group":"Cantina Code","pages":[{"title":"Cantina Code for Companies","href":"/security-teams/cantina-code"},{"title":"Managing Findings","href":"/security-teams/cantina-code/managing-findings"},{"title":"Working with Reports","href":"/security-teams/cantina-code/working-with-reports"}]},{"group":"Community","pages":[{"title":"Building agents on the platform","href":"/security-teams/community/building-agents"},{"title":"Sharing and reusing","href":"/security-teams/community/sharing"},{"title":"Community guidelines","href":"/security-teams/community/guidelines"}]}]},{"group":"For Security Researchers","pages":[{"group":"Joining Cantina","pages":[{"title":"Joining Cantina","href":"/researchers/joining"},{"title":"KYC and Payments","href":"/researchers/joining/kyc"},{"title":"Payout Process","href":"/researchers/joining/payout-process"}]},{"group":"Participation Guides","pages":[{"title":"Participation Guides","href":"/researchers/participation"},{"title":"Bug Bounty","href":"/researchers/participation/bounties"},{"title":"New Bounty Platform","href":"/researchers/participation/new-bounty-platform"},{"title":"Bug Bounty Participation","href":"/researchers/participation/bug-bounty"},{"title":"Bug Bounty Finding Statuses","href":"/researchers/participation/bug-bounty-statuses"},{"title":"Bug Bounty Payout","href":"/researchers/participation/bug-bounty-payouts"},{"title":"Deposits for Bounty Submissions","href":"/researchers/participation/deposits"},{"title":"Competition Participation","href":"/researchers/participation/competitions"},{"title":"Submission Guidelines","href":"/researchers/participation/submission-guidelines"},{"title":"Finding Submission Examples","href":"/researchers/participation/examples"},{"title":"Security Review Process","href":"/researchers/participation/security-review-process"}]},{"group":"Cantina Tools","pages":[{"title":"Cantina Tools","href":"/researchers/tools"},{"title":"Communication Features","href":"/researchers/tools/features"},{"title":"Cantina Code Usage","href":"/researchers/tools/cantina-code"}]},{"group":"Researcher Resources","pages":[{"title":"Researcher Resources","href":"/researchers/resources"},{"title":"Competitions","sidebarTitle":"Competitions (quick links)","href":"/researchers/competitions"}]}]},{"group":"Evaluations \u0026 Standards","pages":[{"title":"Evaluations and Standards","href":"/standards"},{"group":"Severity Classifications","pages":[{"title":"Severity Classifications","href":"/standards/severity"},{"title":"Bug Bounty Severity Classification","href":"/standards/severity/bug-bounty"},{"title":"Competition Finding Severity Criteria","href":"/standards/severity/competition"},{"title":"Finding Labels and Status","href":"/standards/severity/finding-categorization"}]},{"title":"Judging Processes","href":"/standards/judging"}]},{"group":"Referral Program","pages":[{"title":"Referral Program","href":"/referrals"}]},{"group":"Resources","pages":[{"title":"FAQ","href":"/resources/faq"},{"title":"Changelog","href":"/resources/changelog"},{"title":"Public Reports","href":"/resources/public-reports"},{"title":"Links","href":"/resources/links"},{"title":"Clarion Privacy \u0026 Legal Disclosures","href":"/resources/legal"},{"title":"Cantina Community Code of Conduct","href":"/resources/code-of-conduct"},{"title":"Support","href":"/resources/support"}]},{"group":"API Reference","pages":[{"title":"Client API Reference","href":"/api"},{"title":"MCP access","href":"/api/mcp-access"}]}]}]},"basePath":"","title":"Replit - Cantina Documentation","deploymentId":"dpl_vSEmv961Ncyvz1psVwgUnTXQMSYk","buildId":"dpl_vSEmv961Ncyvz1psVwgUnTXQMSYk","dynamics":[],"chunks":[]}